close
close

How To Measure Trailer Axle Alignment

th 3828

How To Measure Trailer Axle Alignment. Divide the measurement in half and measure the result from the inside edge of either wheel hub to the center of the axle. If your travel trailer has more than one axle, repeat the following steps for each axle.

How To Measure Trailer Axle Alignment sdr uk
How To Measure Trailer Axle Alignment sdr uk from lei20.mydaddyisasoldieradventures.org

Remove your boat from the trailer to make this repair much easier. Next measure from the straightedge to the frame in back of the wheel and compare the two measurements. How do you check a trailer axle alignment?

They Should Be Identical Or Within 1/8 Of An Inch, Give Or Take 1/16 Of An Inch.

Next measure from the straightedge to the frame in back of the wheel and compare the two measurements. Then take the same measurement to the other wheel center. A drop axle just allows the trailer to sit lower, usually 4″ for a leaf spring style.

Many People Do A Lot Of Measuring.

Do the same on both sides of the trailer to complete your trailer axle alignment check. Or they use squares, and so on. Measure from the straightedge to the frame in front of the wheel and record the measurement.

• Check The Initial Axle Alignment.

In keeping with our belief of manufacturing heavy duty, high quality axle alignment equipment, our trailer kingpin extension/pogo stick Measure from the center of the extensions tubes. These axles have receiving holes in a flat metal bar welded to the axle to keep the axles aligned.

Lots Of Times People Use The Front Stub Axles Off Cars And Weld A Piece Of Square Or Round Pipe Between Them For The Axle.

A 50’ steel tape measure, preferably with 1/16th graduations is used to measure from the trailer kingpin extension tool. How do you measure axle length? • properly position the trailer.

Remove Your Boat From The Trailer To Make This Repair Much Easier.

Measure your axle track length by determining the distance between the center of one tire to the center of the other tire. Next measure from the straightedge to the frame in back of the wheel and compare the two measurements. The measurements from the center to each tire on the same axle should be within 1/8 inch of each other.

Leave a Reply

Your email address will not be published. Required fields are marked *