How To Light Pilot Light On Gas Fireplace Insert. Click to see full answer. Keep trying periodically to light the pilot light.
A pilot light is a small flame that is kept alight using a steady, small stream of gas. How to light the pilot on a monessen gas fireplace. While pressing down the control knob in the pilot position, press the ignition switch.
Remember To Do This When You Are Ready To Ignite The Pilot Light Of Your Gas Fireplace.
Ventless gas fireplace experts 300 vent free fireplaces. Examine the majestic fireplace and clean off any dust from the gas logs. 11 interesting gas fireplace pilot light pic ideas.
If Gas Is Coming Out Of The Pilot, But It Still Won't Light, The Spark Igniter Could Be The Problem.
This continuous flame is necessary to light large burners such as those found in gas fireplaces. Always remove your fireplace glass prior to lighting your pilot. While pressing down the control knob in the pilot position, press the ignition switch.
Press A Little And Hold The Gas Knob While You Light The Pilot By Pressing The Button To Ignite The Pilot.
A pilot light is a small flame that is kept alight using a steady, small stream of gas. Keep in mind that most gas fireplace models will have a manual switch present. Click to see full answer.
When The Fireplace Or Propane Heater Is Turned On, The Pilot Light Serves As An Ignition Source For The Larger Sweep Of Gas Released From The Burner.
Turn off the control knob for about 5 minutes. Locate the control panel on the fireplace and open it. Read the user’s guide carefully.
When You Are In The Off (Full Clockwise) Position, Rotate Clockwise (Approximately 1/8 Turn) To The Position Of The Pilot And Then Push On The Control Knob Completely Into.
This process may take several minutes and several attempts. Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on.if gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem.look for and clear out any debris between the igniter and thermocouple. First, hold down the gas control button while also holding the end of.